#%#
Individual ports on Print Master may be configured as computer or printer via the Number of Printers/Port Assignment. Computers connect to computer ports. Printers and plotters connect to printer ports.
On all models, a minimum of one port must be assigned as a printer port and a minimum of one port must be assigned as a computer port. It is suggested that the highest numbered port, the master configuration port, be assigned as a computer port to allow easy access to all features of the configuration mode. The remaining ports may be
On the 700A and 700C models, ports are assigned by defining the Number of Printers. Printer ports are assigned to the lowest numbered ports. For example, if the Number of Printers is 1, Port 1 is the printer port and the remaining ports are computer ports. If the Number of Printers is 3, Ports 1, 2, and 3 are printer ports and the remaining ports are computer ports.
On 700D, 700E and 700F models with combination serial/parallel ports, ports are defined by configuring the Port Assignment for individual ports to computer or printer. Any serial or parallel port may be assigned as a computer port or printer port.
NOTE: On Print Master models 710C, 710E and 710F, Port 10 may not be assigned as a printer port.
The factory default printer port on all Print Master models is Port 1 and all other ports are assigned as computer ports.
21
