HP 708E, 710F, 710E, 708D, 706C, 706D Interface, Standard FACTORY-SET POWER-UP Default Configuration

2.￿￿￿￿￿￿￿￿￿￿￿￿￿￿

INTERFACE:

Serial ports: Asynchronous EIA-232C (CCITT V.24), -12v mark, +12v space. Full duplex communication.

Parallel ports: Centronics protocol.

TRANSMISSION: Serial ports - asynchronous; full duplex communication;

Parallel ports - maximum 30,000 characters per second on the 706A and 708A. Up to 5000 characters per second on all other models.

STANDARD FACTORY-SET POWER-UP DEFAULT CONFIGURATION:

Serial ports:

Baud rate: 9600.

Word size: 8.

Stop bits: 1.

Parity: None.

XON/XOFF: Off. Logical name: Device A to J.

Input inactivity timeout: 20 seconds.

Port assignment: Port 1 - printer port.

All other ports - computer ports.

Printer Select Code: $PRINTER.

Printer Select Mode: 2 (Anytime while printing).

Form feed mode: 1 (no form feed).

Header Page Message: Off. "This print job is for:".

3