CAUSE: You are in Printer Select Mode 1 with zero
(0) timeout.
SOLUTION: Switch to Printer Select Mode 2 or increase timeout, both via configuration mode. NOTE: Any select sequence will not be recognized after 16 characters in Printer Select Mode 1.
SYMPTOM: SOME SORT OF PRINTER SELECT CODE PRINTS ON DOCUMENT.
CAUSE: Printer Select Code sent does not match Printer Select Code configured in Print Master.
SOLUTION: Match the Printer Select Code sent exactly with that configured in Print Master.
PROBLEM: CANNOT SELECT PRINTER DURING PRINT JOB
CAUSE: You are using Printer Select Mode 1 (printer selection at beginning of printing only).
SOLUTION: Switch to Printer Select Mode 2 in configuration (printer selection anytime while printing).
PROBLEM: PRINT JOB SWITCHES PRINTERS IN THE MIDDLE OF A PRINT JOB
CAUSE: Timeout period too short.
SOLUTION: Increase input inactivity timeout period via configuration mode.
CAUSE: Port select sequence sent in the middle of the document.
SOLUTION: Verify that Port Select Code is not contained in the document. Do not activate the hot key software while the print job is still being sent from the computer
99