HP 710E, 710F, 708D, 708E, 706C, 706D, 708C, 706A manual

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

The BayTech 700 Series Print Master is a flexible, intelligent device that connects between your computers and peripherals allowing the computers to share the peripherals, including expensive plotters and laser printers. All models come in a self-contained desk-top unit or with a rack mount.

Print Master comes standard with a 1 MB buffer which is optionally available up to 2 MB. The built-in buffer saves valuable computer time by spooling data until the printer or plotter can receive it, keeping the computers working full time instead of waiting.

Print Master models are available with full duplex EIA-232 serial ports and/or Centronics compatible parallel ports depending upon the model purchased. The available serial/parallel port combination are listed below by model.

Model 706A has six parallel ports.

Model 708A has six parallel ports.

Model 706C has six serial ports.

Model 708C has eight serial ports.

Model 710C has ten serial ports.

Model 706D has four parallel and two serial ports.

Model 708D has six parallel and two serial ports.

Model 706E has four serial and two parallel ports.

Model 708E has six serial and two parallel ports.

Model 710E has eight serial and two parallel ports.

Model 708F has four serial and four parallel ports.

Model 710F has six serial and four parallel ports.

On models with combination serial and parallel ports, you may set up Print Master with parallel or serial in and parallel or serial out. Print Master internally converts data from serial-to-parallel or parallel-to-serial. Ports are user-configurable as computer ports or printer ports.

1