!!
By responding to the Enter Request: message at the end of the main configuration menu with "2" (Set Serial Port Configuration), you may change the configuration of each serial port (i.e. baud rate, word size, stop bits, parity, and XON/XOFF). Each port may be configured individually. This allows Print Master to translate for devices using different configurations.
Print Master will respond with a menu similar to:
Enter Port Number (5 to 6, 0=Exit), CR:
Type the desired port number followed by <ENTER>. For instance, if you type "5" and <ENTER>, Print Master will respond with the current status of Port 5 and a menu of the available options:
Port | Baud | Word | Stop | Pariity | Xon/ |
| Rate | Size | Bits |
| Xoff |
5 | 9600 | 8 | 1 | None | Off |
Exit/save | 1 | Set stop bits | 4 |
Set baud rate..2 | Set parity | 5 | |
Set word size..3 | Set Xon/Xoff | 6 |
Enter request:
64