"
&
By responding to the Enter Request: message at the end of the main configuration menu with "3" (Set Input Inactivity Timeout), you may set the input inactivity timeout. Print Master will automatically disconnect the computer if no characters are received from the computer for the specified timeout period.
Print Master 706A and 708A will respond with:
Input Inactivity Timeout is | 20 seconds |
Enter Timeout (0 to 200), hit return | : |
Enter the number of timeout seconds that you wish from 0 to 200, followed by <ENTER>.
NOTE: If 0 (zero) is entered, the input inactivity timeout will be disabled, and the end of a print job will occur only when the computer sends the Printer Select Code followed by a printer port number.
CAUTION: Do not set the input inactivity timeout to zero seconds when Printer Select Mode 1 has been selected. Mode 1 recognizes the end of a print job by input inactivity timeout only. It does not recognize a manual disconnect.
Print Master will save the new input inactivity timeout permanently in
43
