HP 710E, 710F, 708D, 708E, 706C, 706D, 708C, 706A manual Thefollowing!! # $

If you do not have a dumb terminal or a terminal emulation program, BayTech supplies a utility diskette which includes software to put an IBM PC or compatible into a terminal mode. See Section 4.2 for instructions to obtain the software (TERM.EXE) by running the INSTALL.EXE program if you have not already done so.

Once you have obtained TERM.EXE, use the following procedure:

1.From the BAYTECH subdirectory prompt enter: term￿ The program will respond with an identification block

and configuration menu for the PC COM port similar to

￿￿￿￿the￿￿￿￿following:!!￿￿￿￿￿￿￿￿"￿￿￿￿￿￿￿￿￿￿￿￿ ￿￿￿￿￿￿# ￿￿￿ ￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿$￿ ￿￿￿

You are now in the terminal emulation mode with full duplex communication. Any characters you type from the keyboard will be transmitted out of the PC COM port to Print Master. They will not appear on the CRT screen. Any characters received from Print Master by the PC COM port will be displayed on the CRT screen.

2.Ensure the displayed PC Configuration is correct. If not, enter ALT-C to change. For example, if you have your serial cable physically connected to COM2 on your PC, first type ALT-C followed by the up arrow key and then <ENTER> to have the TERM program switch to COM2.

49