"#
By responding to the Enter Request: message at the end of the main configuration menu with "2" (Change Logical Name), you may change the identifying name for the device on each port. Print Master 706A and 708A will respond with:
Enter Port Number (1 to 6, 0=Exit), CR:
Type the number of the desired port followed by <ENTER>. For example, if you type "1" Master will respond with:
Port | Logical | Prnt Assn |
| Name |
|
1 | Device A | 1 |
Enter Logical name:
Enter the new logical name for Port 1. For example, if you enter LaserJet, Print Master will respond with:
Port | Logical | Prnt Assn |
| Name |
|
1 | Device A | 1 |
Enter Port Number (1 to 6, 0=Exit),CR:
If you wish to change the logical name of another port, enter that port number followed by <ENTER> and repeat the above procedure. If no additional changes are required, send 0 (zero) followed by <ENTER>. Print Master will save all changes permanently in
42