HP 710E, 710F, 708D, 708E, 706C, 706D, 708C, 706A manual Enter Printer Select Code

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

￿￿￿￿￿￿￿￿￿￿￿

By responding to the Enter Request: message at the end of the main configuration menu with "5" (Program Printer Select Code), you may change the Printer Select Code to a user-defined code. The Printer Select Code consists of any character string from 1 to 8 ASCII characters.

Print Master will respond with the following:

Printer Select Code is	$PRINTER
Enter Printer Select Code
(0 to 8 Chrs, Hit Return=Terminate)	:

Type the new Printer Select Code followed by <ENTER> or just <ENTER> for no change.

NOTE: Non-printable characters are acceptable, but they will not appear in the status menu. If you are using the BayTech utility software to select printers, be certain to change the Printer Select Code in the software as well.

Print Master will save the new Printer Select Code permanently in non-volatile memory and return to the main configuration menu (see Section 7.2.1).

57