!!#
By responding to the Enter request: message at the end of the main configuration menu with "3" (Change Port Logical Name), you may change the logical name for each connected device to a
Print Master will respond with a message similar to:
Enter Port Number (1 to 6, 0=Exit),CR:
Enter the desired port number followed by <ENTER>. For example, if you type "3" and <ENTER> for Port 3, Print Master will respond with:
Port | Logical | Port | Port | Printer |
| Name | Type | Assignt | Assignt |
3 | Device C | Parall | Computer | 0 |
Enter Logical Name:
Enter the new logical name for Port 3. For example, if you entered "IBM AT", Print Master will respond with:
Port | Logical | Port | Port | Printer |
| Name | Type | Assignt | Assignt |
3 | Device C | Parall | Computer | 0 |
Enter Port Number (1 to 6, 0=Exit), CR:
If you wish to change the logical name on another port, enter that port number followed by <ENTER> and repeat the above procedure. If no additional changes are desired, type "0" (zero) and <ENTER>. Print Master will save the new logical names permanently in
67
