!!
By responding to the Enter Request: message at the end of the main configuration menu with "4" (Set Port Assignment), you may assign any port as a computer port or a printer port.
NOTE: Port 10 on Models 710E and 710F may not be assigned as a printer port.
Print Master will respond with a message similar to:
Enter Port Number (1 to 6, 0=Exit),CR:
Enter the number of the port that you wish to designate a computer or printer port. For example, if you type "3" and <ENTER> for Port 3, Print Master will respond with:
Port | Logical | Port | Port | Printer |
| Name | Type | Assignt | Assignt |
3 | Device C | Parall | Computer | 0 |
Change to Printer or Computer port? (P/C):
Enter capital P if you wish this port to be a printer port. Enter capital C if you wish this port to be a computer port. For example, if you enter "P", Print Master will respond with:
Port |
| Logical |
| Port | Port | Printer |
|
| Name |
| Type | Assignt | Assignt |
3 |
| IBM AT |
| Parall | Printer | 0 |
| Number of Printers is | ..................... | 2 |
| ||
Enter Port Number (1 to 6, 0=Exit), CR:
68
