HP 710F, 710E, 708D, 708E, 706C, 706D, 708C, 706A manual Number of printers is

￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿￿

￿￿￿￿￿￿￿￿

By responding to the Enter Request: message at the end of the main configuration menu with "4" (Set Number of Printers), you may change the number of printers.

IMPORTANT: The lowest-numbered ports on the 706C, 708C and 710C Print Masters are reserved as printer ports. For example, the Model 706C has a total of six available ports of which as many as five may be printer ports with the remainder reserved as computer ports. If you configure two printer ports on Print Master 706C, these would be ports 1 and 2. If you configure four printer ports, these would be ports 1, 2, 3, and 4. Printer ports may not be configured in any other order.

Print Master will respond with:

Number of printers is	1
Enter Number of Printers (1 to 5)	:

Enter the number of printers that you desire.

NOTE: When the number of printers is changed, the printer assignment number on all computer ports automatically resets to 0 (zero), putting the computers in the printer contention mode.

Print Master will save the new number of printers permanently in non-volatile memory and return to the main configuration menu (see Section 7.2.1).

56