Hood sensor

The hood sensor is located on the bottom left of the computer (when viewed from behind). Figure 7-85Hood sensor location

To remove the hood sensor:

1.Prepare the computer for disassembly (see Preparing to disassemble the computer on page 32).

2.Prepare the computer for disassembly (see Preparing to disassemble the computer on page 32).

3.Remove the access panel (see Access panel on page 36).

4.Remove the stand (see Stand on page 38).

5.Remove the lower panel (see Lower panel on page 40).

6.Remove the side panels (see Side panels on page 78).

7.Remove the metal plate (see Metal plate on page 41).

8.Remove the power supply (see Power supply on page 80).

9.Remove the system board (see System board on page 83).

10.Remove the front bezel (see Front bezel on page 94).

11.Remove the display panel (see Display panel on page 99).

12.Disconnect the hood sensor cable from the system board connector labeled HSENSE.

Hood sensor 105