5.Remove the Torx screw (1) that secures the power connector to the computer, and then lift the connector from atop the speaker (2).

Figure 7-62Removing the power connector

6.Disconnect the cable from the system board connector (1).

7.Position the cable above the power supply (2).

Positioning the cable above the power supply makes it easier to slide the power supply downward and out of the bracket that secures it.

Figure 7-63Removing the power supply

Power supply 81

Page 89
Image 89
HP 8300E B8U11UT#ABA manual 63Removing the power supply Power supply