Stand

The stand is secured with two captive Torx screws. You must remove a plastic cover to gain access to the screws. You must remove the access panel to remove the stand.

To remove the stand:

1.Prepare the computer for disassembly (see Preparing to disassemble the computer on page 32).

2.Remove the access panel (see Access panel on page 36).

3.Push the release button (1) on the bottom of the stand and pull the back of the stand off (2). Figure 7-9Removing the back of the stand

4.Push the base of the stand down (1), and loosen the two captive Torx screws securing the stand to the chassis (2).

Figure 7-10Releasing the stand

38 Chapter 7 Removal and Replacement Procedures All-in One (AIO) Chassis