Speakers
On products that ship with speakers, the speakers are located at the bottom of the computer. Two separate speakers are each secured by two Torx screws. To remove the right speaker you have to remove the power supply plug.
Speakers are optional.
Figure 7-56 Speaker location
To remove the speakers:
1.Prepare the computer for disassembly (see Preparing to disassemble the computer on page 32).
2.Remove the access panel (see Access panel on page 36).
3.Remove the stand (see Stand on page 38).
4.Remove the lower panel (see Lower panel on page 40).
5.Remove Torx screw that secures the power connector to the computer, and lift the connector from its position on top of the left speaker (1).
6.Remove two Torx screws (2) that secure each speaker to the computer.
7.Disconnect the speaker cables from the system board connector labeled SPKR(3). Figure
8.Remove the speakers from the computer.
To install the speakers, reverse the removal procedures.
76 Chapter 7 Removal and Replacement Procedures
