HP FESSIONAL M1130, FESSIONAL M1210 manual No dial tone, No document sent, No fax answer

Control panel message	Description	Recommended action
No dial tone	The product could not detect a dial tone.	Check for a dial tone on the phone line by
		pressing the Send Fax	button.
		Unplug the telephone cord from both the
		product and the wall and replug the cord.
		Make sure that you are using the telephone
		cord that came with the product.
		Unplug the product telephone cord from the
		wall, plug in a telephone, and try making a
		voice call.
		Make sure that the phone cord from the wall
		telephone jack is plugged into the line
		port.
		Plug the product phone cord into a jack for
		another phone line.
		If the error persists, contact HP. See
		www.hp.com/support/ljm1210series or the
		support flyer that came in the product box.
No document sent	The product did not scan any pages, or it did	Try sending the fax again.
	not receive any pages from the computer to
	transmit a fax.

No fax answer.	Attempts to redial a fax number failed, or the
Canceled send	Redial-no answer option was turned off.

Call the recipient to ensure that the fax machine is on and ready.

Check that you are dialing the correct fax number.

Check that the redial option is enabled.

Unplug the telephone cord from both the product and the wall and replug the cord.

Unplug the product telephone cord from the wall, plug in a telephone, and try making a voice call.

Make sure that the phone cord from the wall telephone jack is plugged into the line port.

Plug the product phone cord into a jack for another phone line.

If the error persists, contact HP. See www.hp.com/support/ljm1210series or the support flyer that came in the product box.

130 Chapter 10 Fax (M1210 Series only) ENWW