HP M1212NF CE841A#BGJ Control panel shows a low-memory error, Faxes are transmitting very slowly

The control panel shows a low-memory error.

Cause	Solution
The fax might be too large, or the resolution might be too high.	Try one of the following:
	● Divide a large fax into smaller sections, and then fax them
	individually.
	● Clear stored faxes to make more memory available for
	outgoing faxes.
	● Configure the outgoing fax as a delayed fax, and then
	verify that it will send completely.
	● Make sure that the product is using the lowest resolution
	setting (Standard).
Faxes are transmitting very slowly.
Cause	Solution
The fax might be very complex, such as one with many	Complex faxes take longer to be sent or received. Breaking
graphics.	longer faxes into multiple jobs and decreasing the resolution
	can increase the transmission speed.
The receiving fax machine might have a slow modem speed.	The product sends the fax only at the fastest modem speed
	that the receiving fax machine can accept.
The resolution at which the fax was sent might be very high.	To send the fax, lower the resolution and resend the fax.
The telephone line might be experiencing line noise.	Hang up and resend the fax. Have the telephone company
	check the telephone line.
	If the fax is being sent via a digital phone line, contact the
	service provider.
The fax is being sent via an international call.	Allow more time to transmit fax jobs internationally.
The original document has a colored background.	Reprint the original document with a white background, and
	then resend the fax.

ENWW Solve fax problems 137