HP M1212NF CE841A#BGJ Interpret control-panel messages M1210 Series only, Control-panel messages

Interpret control-panel messages (M1210 Series only)

Control-panel message types

Alert and warning messages appear temporarily and might require you to acknowledge the message by pressing the OK button to resume or by pressing the Cancel button to cancel the job. With certain warnings, the job might not complete or the print quality might be affected. If the alert or warning message is related to printing and the auto-continue feature is on, the product will attempt to resume the printing job after the warning has appeared for 10 seconds without acknowledgement.

Critical error messages can indicate some kind of failure. Turning off and then turning on the power might fix the problem. If a critical error persists, the product might require service.

Control-panel messages

Control panel message	Description	Recommended action
50.X Fuser Error	The product has experienced an internal	1. Turn off the power by using the power
Turn off then on	hardware error.		switch, and then wait at least 30
			seconds.
		2.	If a surge protector is being used,
			remove it. Plug the product directly into
			the wall socket.
		3.	Turn on the power and wait for the
			product to initialize.
		If the error persists, contact HP. See
		www.hp.com/support/ljm1210series or the
		support flyer that came in the product box.
52 Scanner Error	The product has experienced a scanner	Turn off the power by using the power switch,
Turn off then on	error.	wait at least 30 seconds, and then turn on the
		power and wait for the product to initialize.
		If a surge protector is being used, remove it.
		Plug the product directly into the wall socket.
		Use the power switch to turn the product on.
		If the error persists, contact HP. See
		www.hp.com/support/ljm1210series or the
		support flyer that came in the product box.
54.1C Error	The product has experienced an internal	Turn off the power by using the power switch,
Turn off then on	hardware error.	wait at least 30 seconds, and then turn on the
		power and wait for the product to initialize.

If a surge protector is being used, remove it.

Plug the product directly into the wall socket.

Use the power switch to turn the product on.

If the error persists, contact HP. See www.hp.com/support/ljm1210series or the support flyer that came in the product box.

ENWW Interpret control-panel messages (M1210 Series only) 189