HP M1212NF CE841A#BGJ, FESSIONAL M1130 Set stamp-received faxes, Set the private receive feature

The factory-set default for the fax-sounds volume is Soft.

Set the alert volume, phone-line volume, and ring volume

1.Press the Setup button.

2.Use the arrow buttons to select the System setup menu, and then press the OK button.

3.Use the arrow buttons to select the Volume settings menu, and then press the OK button.

4.Use the arrow buttons to select the Alarm volume menu, the Phoneline volume menu, or the Ring volume menu, and then press the OK button.

5.Use the arrow buttons to select the Off, Soft, Medium, or Loud setting.

6.Press the OK button to save the selection.

Set stamp-received faxes

The product prints the sender identification information at the top of each received fax. You can also choose to stamp the incoming fax with your own header information to confirm the date and time that the fax was received. The factory-set default for stamp-received faxes is Off.

NOTE: Turning on the stamp-received setting might increase the page size and cause the product to print a second page.

NOTE: This option applies only to received faxes that the product prints.

1.On the control panel, press the Setup button.

2.Use the arrow buttons to select the Fax setup menu, and then press the OK button.

3.Use the arrow buttons to select the Fax Recv. setup menu, and then press the OK button.

4.Use the arrow buttons to select the Stamp faxes menu, and then press the OK button.

5.Use the arrow buttons to select the On or Off option, and then press the OK button to save the selection.

Set the private receive feature

NOTE: The private receive feature does not affect the reprint last fax feature. To limit access to all received faxes, make sure that the Reprint faxes setting is set to Off.

When the private-receive feature is activated, received faxes are stored in memory. A personal identification number (PIN) is required to print the stored faxes.

Turn on the private receive feature

1.On the control panel, press the Setup button.

2.Use the arrow buttons to select the Fax setup menu, and then press the OK button.

3.Use the arrow buttons to select the Fax Recv. setup menu, and then press the OK button.

4.Use the arrow buttons to select the Private receive menu, and then press the OK button.

5.Use the arrow buttons to select the On option, and then press the OK button.

ENWW Set fax settings 113