Use the HP Embedded Web Server (M1210 Series only)

Use the HP Embedded Web Server (EWS) to view product and network status and to manage printing functions from a computer.

View product status information

Determine the remaining life on all supplies and order new ones

View and change the product default configuration settings

View and change network configuration

You do not need to install any software on the computer. You only need to use one of these supported Web browsers:

Internet Explorer 6.0 (and later)

Firefox 1.0 (and later)

Mozilla 1.6 (and later)

Opera 7.0 (and later)

Safari 1.2 (and later)

Konqueror 3.2 (and later)

The HP Embedded Web Server works when the product is connected to a TCP/IP-based network. The HP Embedded Web Server does not support IPX-based connections or direct USB connections.

NOTE: You do not have to have Internet access to open and use the HP Embedded Web Server. However, if you click a link on any of the pages, you must have Internet access to go to the site associated with the link.

Open the HP Embedded Web Server

To open the HP Embedded Web Server, type the IP address or host name of the product in the address field of a supported Web browser. To find the IP address or host name, print a configuration page.

NOTE: If an error occurs while opening the HP Embedded Web Server, confirm that the proxy settings are correct for your network.

TIP: After you open the URL, bookmark it so that you can return to it quickly in the future.

Features

Information tab

The Information pages group consists of the following pages:

Device Status displays the status of the product and HP supplies.

Device Configuration shows the information found on the Configuration page.

ENWW

Use the HP Embedded Web Server (M1210 Series only) 151

Page 165
Image 165
HP FESSIONAL M1210 manual Use the HP Embedded Web Server M1210 Series only, Open the HP Embedded Web Server, Features