Managing HyperFabric
Displaying Status and Statistics
•Example 4
If the local node is bently6, and you want to display the VRIDs, IP addresses, switch hopcounts, and physical routes for each HyperFabric adapter in bently6, issue this command:
clic_stat -d VRID
The generated output if the nodes are connected in a
============================================================================
Date: Sat Aug 5 16:08:12 2000
Node: bently6.corp4.com
============================================================================
Adapter : clic0
VRID IP Address Switch Hopcount Route Id Physical route
1 | 192.0.0.1 | 0 | Point to Point Connection | |||
2 | 192.0.0.2 | 0 | Point to Point Connection | |||
12 | 192.0.0.12 | 0 | Point | to | Point | Connection |
13 | 192.0.0.13 | 0 | Point | to | Point | Connection |
============================================================================
Adapter : clic2
VRID IP Address Switch Hopcount Route Id Physical route
1 | 192.0.0.1 | 0 | Point to Point Connection | |||
2 | 192.0.0.2 | 0 | Point to Point Connection | |||
12 | 192.0.0.12 | 0 | Point | to | Point | Connection |
13 | 192.0.0.13 | 0 | Point | to | Point | Connection |
============================================================================
The generated output if the nodes are connected through a switch could look like this:
Chapter 4 | 95 |
