HP manual Kernel library that contains the HyperFabric software

Installing HyperFabric

Installing the Software

•/var/adm/OLDclic_log

The log file from the previous time the clic_start command was executed.

•/usr/conf/lib/libclic_dlpi_drv.a

The kernel library that contains the HyperFabric software.

•/usr/conf/lib/libha_drv.a

The kernel library that contains the High Availability (HA) software.

•/usr/conf/master.d/clic

This file is described along with the other master files in the master man page (type man master at the HP-UX prompt).

•/opt/clic/lib/libclic_mgmt.a

The HyperFabric management API library.

•/opt/clic/bin

The directory containing the HyperFabric management commands: clic_diag, clic_init, clic_probe, clic_shutdown, clic_start, clic_stat, and clic_dump. (Note that clic_dump is for HP internal use only.) Also, although clic_ping was replaced by clic_probe beginning with HyperFabric versions B.11.00.11 and B.11.11.01, it is still supported for HP-UX 10.20 HyperFabric version B.10.20.11. This directory also contains the HyperFabric management process (clic_mgmtd) and the HyperFabric EMS monitor process (clic_mond).

•/opt/clic/firmware/clic_fw

The 1X HSC HyperFabric 8-bit CRC firmware. Note that this file must not be modified for any reason.

•/opt/clic/firmware/clic_fw_1x32c

The 1X HSC HyperFabric 32-bit CRC firmware. Note that this file must not be modified for any reason.

62 Chapter 3