HP HyperFabric manual 110

Troubleshooting HyperFabric

Useful Files

/var/adm/clic_fw.dumpx

This is the default file for a memory dump of an HyperFabric adapter, created when the clic_diag -dcommand is run without specifying an output file.

•/etc/rc.config.d/netconf

This file contains IP-related configuration information for all of the networking adapters installed in the HP 9000.

IMPORTANT: clic_init and SAM modify this file, adding some HyperFabric-related lines that end with the characters #clic. These lines are used by the HyperFabric software—and are not comments—so do not remove them from the file.

•/etc/services

This is the system service name database.

IMPORTANT: These two HyperFabric-related lines must be in this file:

—hp-clic 3384/tcp #clic management daemon

—hp-clic 3384/udp #clic switch management

These lines are used by the HyperFabric software—and are not comments—so do not remove them from the file.

110 Chapter 5