Installing HyperFabric

Installing HyperFabric Switches

After the HyperFabric switch is mounted in the rack, you attach the various cables to the switch.

To avoid damage to any of the cables, follow these guidelines:

If your cables have dust caps over the connectors, keep them in place until you are ready to connect them. This prevents dirt and oils from soiling any important surfaces.

Be careful not to stretch, puncture, or crush the cable.

To install a HF1 switch see the next section, “Steps for Installing the HF1 Switch”.

To install an HF2 switch, see “Installing the HF2 Switch” on page 76.

Chapter 3

67

Page 67
Image 67
HP manual Installing HyperFabric Switches