HP HyperFabric manual Useful Files

Troubleshooting HyperFabric

Useful Files

Useful Files

When you are troubleshooting HyperFabric-related problems, you might find it useful to look at the contents of the following files:

•/etc/rc.config.d/clic_global_conf

This is the global configuration file. Check it to confirm that the configuration information is correct.

•/var/adm/clic_log

This is a global log file that contains a history of significant HyperFabric events. For example, it contains a history of the fabric’s startup and any errors that occurred during it.

•/var/adm/clic_log.old

This is the backup copy of the log file that is created when the log file grows larger than 100 Kbytes

•/var/adm/OLDclic_log

This is the log file from the previous time the clic_start command was executed.

•/var/adm/syslog.log

This is the system log file, which contains a history of events occurring on the HP 9000 system.

•/var/adm/clic_ip_drv.trc

This is one of the HyperFabric software’s trace files, and it is created by the clic_diag -D TCP_IP command.

•/var/adm/clic_ip_drv.trc0

This is one of the HyperFabric software’s trace files, and it is the primary file created by the clic_diag -C TCP_IP command.

•/var/adm/clic_ip_drv.trc1

This is one of the HyperFabric software’s trace files, and it is created by the

clic_diag -C TCP_IP command when the primary trace file (clic_ip_drv.trc0) becomes full.

Chapter 5 109