Man pages for the HyperFabric commands

Installing the Software

•/opt/clic/firmware/clic_fw_4x8c

The 4X PCI HyperFabric 8-bit CRC firmware. Note that this file must not be modified for any reason.

•/opt/clic/firmware/clic_fw_4x32c

The 4X HyperFabric PCI 32-bit CRC firmware. Note that this file must not be modified for any reason.

•/opt/clic/firmware/clic_fw_hf28c

The HyperFabric2 8-bit firmware. Note that this file must not be modified for any reason.

•/opt/clic/firmware/clic_fw_hf232c

The HyperFabric2 32-bit firmware. Note that this file must not be modified for any reason.

•/opt/clic/firmware/clic_fw_db

A binary file where adapter-specific configuration information is stored. The management process creates this file using default values.

•/opt/clic/share/man/man1m.Z

The man pages for the HyperFabric commands.

Chapter 3