Configuring HyperFabric
Information You Need
8.If switch management has been enabled, how many switches will be configured? As stated earlier, we recommend that you do not enable switch management.
9.What is the IP address of the first switch (sw_clic0)? (193.0.0.20)
10.What is the Ethernet hardware address of the first switch? (0060b0d00257)
11.What is the IP address of the second switch (sw_clic1)? (193.0.0.21)
12.What is the Ethernet hardware address of the second switch? (0060b0d00256)
13.What is the Multicast address for the switches to use? (226.10.1.1)
14.What is the IP address for the LAN card on the same subnet as the switches? (193.0.0.11)
(Looking at Figure
90 | Chapter 4 |
