Installing HyperFabric

Installing the Software

The global configuration file, which contains the IP addresses for each adapter and each HyperFabric switch (if any) in the fabric.

/sbin/init.d/clic

The system boot startup script for the HyperFabric management process.

/var/adm/clic_ip_drv.trc

One of the software’s trace files. This file is created when the clic_diag -D TCP_IP command is run.

/var/adm/clic_ip_drv.trc0

One of the HyperFabric software’s trace files. This is the primary file that is created when the clic_diag -C TCP_IP command is run.

/var/adm/clic_ip_drv.trc1

One of the HyperFabric software’s trace files. This file is created when the clic_diag -C TCP_IP command is run, and the primary trace file (clic_ip_drv.trc0) becomes full.

/var/adm/clic_log

The global log file that is updated by the HyperFabric management process.

/var/adm/clic_log.old

The backup copy of the log file that is created when the log file grows larger than 100 Kbytes.

Chapter 3

61

Page 61
Image 61
HP HyperFabric manual Sbin/init.d/clic