Emulations

Default Off

Notes The available range of plotter units for a particular paper size is only partially determined by setting the Expand Mode to On. When the printer/plotter senses the paper size it automatically sets the hard clip limit to 15mm on three sides and 39 mm on the fourth. If Expand Mode is On, then the hard clip limits are set to 5mm on three sides and 29 mm on the fourth side. This is what allows you to define a larger imageable area.

The HP-GL emulation senses the paper type if the paper type is set to Scale to Paper. It is also possible to have the HP-GL emulation use a particular paper size by setting Original Paper Type through the control panel or by using a Document Option Command.

Paper Type

Identifies the original image’s paper size.

Menu Administration/Emulations/HPGL/Paper Type

Printer Configuration

4-67