Emulations

Line Termination

Indicates the default line termination mode. This setting specifies the treatment of line feeds and carriage returns. (See Appendix C, “Docu- ment Option Commands,” for more information on line termination).

Menu Administration/Emulations/PCL 5E/Line Termination

Choices CR=CR LF=LF

CR=CR+LF LF=LF

CR=CR LF=CR+LF

CR or LF=CR+LF

Default CR=CR LF=LF

Point Size x100

Sets the point size for scalable default fonts in units of hundreths of a point. For example, a 24 point default point size is selected by entering 2400. The smallest increment allowed in point size is .25 point (for example, 8.5 point and 8.75 point fonts are allowed, but 8.6 point is not).

Menu Administration/Emulations/PCL 5E/Point Size x100

Choices 00025-99975 (0.25-999.75 points)

Default 01200 (12 points)

Notes If a nonscalable bitmap font is specified, the setting is ignored.

4-60

QMS 4060 Print System Reference