Printer Start-Up

Options

name, the PostScript version, and various printer settings. However, you can turn the start-up page off to conserve paper and toner.

Menu Administration/Startup Options/Do Start Page

Choices Yes—Print a start-up page each time the printer is turned on.

No—Don’t print a start-up page each time the printer is turned on.

Default Yes

Notes If you used the Administration/Engine/Inputbin x Name options to change the names of the input bins, these names replace Upper, Middle, Lower, and Optional in the message window.

Enabling/Disabling the SYS\START File

If you have a hard disk and Do Sys Start is enabled, when the printer is turned on, the controller checks the hard disk for a PostScript file named SYS\START and executes this file.

Menu Administration/Startup Options/Do Sys Start

Choices Yes—Check the hard disk for and execute the SYS\START file when the printer is turned on. No—Don’t check the hard disk for a SYS\START file.

Default Yes

Notes This file does not print. Information on creating a SYS\START file is available via Q-FAX (see appendix A, “QMS Customer Support,” for information on using Q-FAX).

4-78

QMS 4060 Print System Reference