Configuration
Menu
ronment. To avoid confusion in a shared printing environment, only the system administrator should make configuration changes. See the QMS CrownAdmin
»Note: If a remote console has the printer off line, pressing the Online button will not take effect until the console puts the printer back on line.
Using the Local Console Port
The Local Console port can also allow you to make configuration choices that are normally made at the control panel. See chapter 6, “Local and Remote Console,” of the Operations manual for more information.
»Note: If a local console has the printer off line, pressing the Online button will not take effect until the console puts the printer back on line.
Configuration Menu
The printer’s configuration menu allows you to change the default printer configuration settings. Any changes made to the configuration will reside as new default settings and affect all subsequent print jobs.
The options in the configuration menu are organized under three main menus:
nOperator Control Menu
Use this menu to select document processing options such as copy count, choosing input and output paper bins, chaining input bins, and duplexing (if a duplexing unit is installed). Document processing options are usually specified within individual jobs since each job has its own requirements. However, if there’s no way of specifying these options within an application, use the control panel to change options, send the job, and then change the defaults back.
QMS 4060 Print System Reference |