Operator Control

Menu

Default On

Notes The Operator Control/Chain Option menu must be set to On before the setting in this menu takes effect.

Upper Inputbin

Use the Operator Control/Chain Option/Upper Chaining menu to chain to the upper inputbin.

Menu Operator Control/Chain Option/Upper Chaining

Choices On—Allow media to be pulled from the upper inputbin if necessary.

Off—Don’t allow media to be pulled from the upper inputbin.

Default On

Notes The Operator Control/Chain Option menu must be set to On before the setting in this menu takes effect.

Custom Input Bins

This option allows you to set up the paper size for the optional custom input tray. Since the tray can be installed in the upper, middle, or lower tray positions there are three options under this menu—one for each tray position.

Menu Operator Control/Custom Input Bin

Choices Upper, Middle, or Lower

Default The default setting for each tray position is letter paper size.

Notes The choices for each tray position are letter, legal, executive, A3, A4, A5, B4, B5, B4 (ISO), B5 (ISO), 11 x 17, Statement.

4-28

QMS 4060 Print System Reference