Memory
Media | Minimum Frame Buffer Size (in KB) | |||
|
|
|
|
|
| 300dpi | 300dpi | 600dpi | 600dpi |
| simplex | duplex | simplex | duplex |
|
|
|
|
|
Statement | 2200* | 2200* | 2200* | 3752 |
|
|
|
|
|
Executive | 2200* | 2200* | 3124 | 6248 |
|
|
|
|
|
»Note: * 2200KB is the minimum allowed for the Frame Buffer client.
Display List
Also known as K Mem Display, this client stores compressed repre- sentations, or blocks, of the pages to be printed. It takes approximately one compressed block for a normal 8.5" x 11" (215.9 mm x
279.4mm) text page, four compressed blocks for an 8.5" x 11" (215.9 mm x 279.4 mm) page that includes some graphics, and as many as 500 compressed blocks for an extremely complex page.
Many pages of compressed blocks belonging to multiple print jobs can be stored at the same time in the display list. If enough memory is allocated to this memory client, a page can always be ready to print as soon as another page has been imaged to the print engine.
The amount of memory required for each compressed block is printer specific. The QMS 4060 Print System takes approximately 64 KB of memory from the display list for each compressed block. However, if a page includes raster image data (for example, TIFF or bitmap data), each compressed block will require much more memory.
Increasing the amount of memory in this client may improve printing throughput and minimize slowdowns due to collating or printing complex pages. If your QMS 4060 Print System has a hard drive and the disk swap option is enabled the memory added to this client is taken from virtual memory. If your printer does not have a hard drive then the memory added to this client is taken from the amount of physical memory in your printer. It may be necessary to reduce memory added to another client before adding memory to the Display List. Check that the Frame Buffer still has the minimum amount of memory needed for your printing needs before reallocating this memory.
Additional Technical Information |