Operator Control

Menu

Default On

Notes Use the Operator Control/Inputbin menu to set the default inputbin. Make sure that the three inputbins use the same size paper.

When chaining "on any" and duplexing, the printer will chain to a similar size paper (for example, letter to A4) but not to the large paper sizes—11"x17" and A3.

This is because these large sizes are fed through the printer in a different printing order than the smaller sizes. When these restrictions occur on chaining on any, the printer will prompt you to add the default paper size to any tray. The custom tray chaining "on any" for large format- paper will not occur unless there is another custom tray with the same paper size or a standard tray with A3 or 11"x17" paper.

Setting Up Chaining Options

Options in the Operator Control menu allow you to configure whether or not an inputbin will be available for chaining from another inputbin.

Large-Capacity Input Feeder (LCIF)

Use the Operator Control/Chain Option/LCIT Chaining to chain to the optional tray.

Menu Operator Control/Chain Option/LCIT Chaining

Choices On—Allow media to be pulled from the large-capacity input tray.

Off—Don’t allow media to be pulled from the large- capacity input tray.

4-26

QMS 4060 Print System Reference