HP QMS 4060 manual 88

Communications

Setting Network 2 Options

CrownNet

For information on options and defaults found in this menu, see chapter 2, “Printer Configuration,” in the QMS CrownNet System Adminis- trator’s Guide.

PS Protocol

Sets the binary communications protocol (BCP) for communicating over a CrownNet interface to a PostScript printer.

Menu Administration/Communications/Network 2/PS Protocol

Choices Normal—Enables standard, ASCII (7-bit) hex protocol. Data is sent and received in ASCII format. This mode is recommended if you do not print binary data. It was designed for data in the printable ASCII range. Print jobs can change this setting through PostScript operators.

Normal Fixed—Enables standard, ASCII (7-bit) hex protocol. Print jobs cannot change this setting through PostScript operators.

Binary—Enables quoted binary communications protocol (BCP). Print jobs can change this setting through PostScript operators. Data in the printable ASCII range also prints.

4-54 QMS 4060 Print System Reference