Engine

Engine

Through the Administration/Engine menu you can set print engine- related parameters.

Adjusting the Image Alignment

This option allows you to adjust the horizontal and vertical placement of printed images.

To check image alignment, print a standard status page (Print Status button). When the printer is placing images properly, the alignment angle bar in the lower-left corner of the status page is 0.5"/12.7 mm from the left and bottom edges of the page. If the angle bar is off, use the Administration/Engine/Image Alignment option to align the image horizontally and vertically in pixel increments (1/300" or 0.08 mm).

»Note: Engine constraints may limit the accuracy of pixel alignment.

Horizontal Offset

Menu Administration/Engine/Image Alignment/Horiz Offset

Choices 000-300 (0.00"/0 mm-1.00"/25.4 mm)

Default 100 (0.33"/.84 mm)

Notes Values above 100 move the image to the right. Values below 100 move the image to the left.

Vertical Offset

Menu Administration/Engine/Image Alignment/Vertical Offset

Choices 000-300 (0.00"-1.00")

4-86

QMS 4060 Print System Reference