Memory
Manual Configuration Menu
The manual configuration menu allows you to finely adjust memory clients to your particular printing needs.
Configuring Spooling
The K Mem for Spool, listed on the status page as Host Input, is the total number of kilobytes of RAM allocated to all spooling buffers. This memory client stores incoming data from the various interfaces until it is processed and printed.
Menu Administration/Memory/Manual Config/K Mem for Spool
Choices
Notes This value must be greater than the sum of the Min K Spool for all installed and enabled interfaces.The maximum value listed depends on the amount of memory installed.
If you change the K Mem for Spool value, the printer automatically restarts after you save your changes and exit from the configuration menu.
When the sum of the Min K Spool for all interfaces is less than K Mem for Spool, memory is allocated as follows:
1Interfaces with Min K Spool (in the Administration/Communica- tions menu) value greater than zero receive their specified alloca- tion.
2The remaining memory in K Mem for Spool is allocated to Shared Spooling Space. This can be seen in the Communications Set- tings & Input Buffer Sizes area of the status page.
3The Shared Spooling Space can be allocated to any of the com- munication interfaces if the input jobs require more spooling space. The limit to this is the amount of Host Input (K Mem for Spool) shown on the status page.
QMS 4060 Print System Reference |