Media Sizes and

Imageable

Areas

The following table lists the size, imageable area, and feed edge (the edge of the media drawn into the printer first) of all supported media as well as information about their input, output, and finishing options:

Media

Media Size

Imageable Area

Feed

Input/

 

 

 

 

 

 

 

 

 

 

Inches

Millimeters

Inches

Millimeters

Edge

Output

 

 

 

 

 

 

 

 

 

 

 

 

 

11x17

11.00x17.00

279.4x431.8

10.67x16.67

270.93x423.38

Short

D, L, M, P, U

 

 

 

 

 

 

 

 

A3

 

11.69x16.54

297.0x420.0

11.35x16.20

288.21x411.48

Short

D, L, M, P, U,

A4

 

11.69x8.27

297.0x210.0

7.93x11.35

201.51x288.21

Long

D, F, L, M, U

A5

 

5.85x8.27

148x210.0

5.48x7.94

139.12x201.55

Short

P D, D, L, M

 

 

 

 

 

 

 

U, P

 

 

 

 

 

 

 

 

B4

(JIS)

10.12x14.33

257.0x364.0

9.77x13.998

248.24x355.56

Short

D, L, M, P, U

B5

(JIS)

7.17x10.12

182.0x257.0

6.87x9.78

173.40x248.50

Short

D, L, M, P, U

 

 

 

 

 

 

 

 

B4

(ISO)

9.84x13.90

250x353

9.50x13.57

241.47x344.55

Short

C, D, P,

B5

(ISO)

6.93x9.84

176x250

6.59x9.51

167.30x241.55

Short

C, D, P

 

 

 

 

 

 

 

Executive

7.25x10.50

184.20x266.70

6.92x10.20

175.73x259.13

Short

D, M, P

 

 

 

 

 

 

 

Legal

8.5x14.0

215.9x355.6

8.16x13.67

207.26x347.18

Short

D, L, M, P, U

Letter

11.00x8.5

279.40x215.90

8.17x10.67

207.48x270.93

Long

D, F, L, M, P

 

 

 

 

 

 

 

U

 

 

 

 

 

 

 

Statement

5.50x8.50

139.7x215.9

5.16x8.17

131.06x207.48

Short

C, D, P

 

 

 

 

 

 

 

 

*D=Duplexer, F=Large-Capacity Input Feeder, L=Lower tray, M=Middle tray, U=Upper tray, P=Large-Capacity Output Stacker, C=Custom tray

Working Within the Imageable Area

The imageable areas for print media on your QMS 4060 Print System may vary 1/16" (1.6 mm). This is normal mechanical engine alignment tolerances. You can adjust the alignment of the image in several different ways:

nAdjust the margins or page size through your application.

nUse the printer’s control panel (Administration/Engine/Image Alignment menu).

nUse the PostScript translate and scale operators to reduce image size and change its placement on the page.

Print Media

2-3