Emulations

Plotter

Identifies the HP-GL plotter type.

Menu Administration/Emulations/HPGL/Plotter

Choices 7475A—

7470A—

Colorpro—

7550A—

DraftMaster—Supports architectural and engineering paper sizes (for example, A to E and Arch A to Arch E). These paper sizes describe a mapping to the physical paper. This mapping is a scaling factor (or a size ratio) between the chosen paper size and the physical paper size in the default inputbin. For example if A3 is selected (size 11.69'' x 16.54'') for paper size and the physical paper size in the default inputbin is A4 (8.27'' x 11.69''), then the plot is scaled by a factor of 2.

Default 7550A

Scaling Percent

Identifies the percentage to reduce or enlarge an image.

Menu Administration/Emulations/HPGL/Scaling Percent

Choices 001-150 (1-150%)

Default

100 (100%)

»Note: To scale plots, select the paper size originally used for the plot in the Paper Type menu and then enter the reduction or enlargement needed to fit the plot on the new page in the Scaling Percent menu.

Printer Configuration

4-65