Internal Modem

6.In the Phone and Modem Options window, select the Modems tab.

7.Select your modem > Properties button > Modem tab.

8.Clear the Wait For Dial Tone Before Dialing check box.

9.Select the OK button > OK button.

Accessing Communication Software

To access preinstalled modem software, including software for terminal emulation and data transfer, select Start > All Programs > Accessories > Communications, then select an application, wizard, or utility.

Finding AT Command Information

It is not necessary to use AT commands with most modem software. If you prefer to use AT commands, refer on this CD to:

■Modem Command Guidelines for information about accessing Hyperterminal, identifying the modem in your tablet PC, and using AT commands.

■The Soft Modem AT Command Reference Manual for the AT commands supported by your modem. This guide is provided in English only.

6–8

Hardware Guide