![](/images/new-backgrounds/1308315/308315209x1.webp)
Internal Modem
3.Select your location, then select the Edit button.
4.Select the Tone or Pulse radio button.
5.Select the OK button > OK button.
Check the Telephone Number
Dial the telephone number on the telephone, verify that the remote modem is answering, then hang up.
Check the Dial Tone
If the modem receives a dial tone it does not recognize, it will not dial and will display a No Dial Tone error message.
■To set the modem to ignore all dial tones before dialing:
1.Select Start > Control Panel > Network and Internet Connections category.
2.From the See Also menu in the left column of the window, select Phone and Modem Options > Modems tab.
3.Select your modem > Properties button > Modem tab.
4.Clear the Wait For Dial Tone Before Dialing check box.
5.Select the OK button > OK button.
■If you continue to receive the No Dial Tone error message after clearing the check box:
1.Select Start > Control Panel > Network and Internet Connections category.
2.From the See Also menu in the left column of the Network and Internet Connections window, select Phone and Modem Options > Dialing Rules tab.
3.Select your location, then select the Edit button.
4.Select your location from the Country/Region list.
✎If you select a country or region that is not supported by the modem, the country configuration defaults to USA or UK.
5.Select the OK button.
Hardware Guide |