HP tc1000 manual Setting Command Control Preferences, Selecting a View

Pen, Command Controls and Keyboards

Setting Command Control Preferences

All command controls except the Display Toggle button and the enter function of the jog dial can be customized to launch applications, simulate key combinations, or perform preset system functions.

Each programmable command control can be assigned to

4 settings. Each setting applies only to 1 of 4 views:

■Portrait-Primary

■Portrait-Secondary

■Landscape-Primary

■Landscape-Secondary

Command control preferences are set in the Tablet and Pen Settings window. You must select a view before setting a preference. Each view is illustrated in the Button Location pane of the Tablet and Pen Settings window as you select it.

If you are unfamiliar with the four views, you may want to read “Selecting a View” next in this section, before setting a command control preference.

Selecting a View

In the Portrait-Primary and Portrait-Secondary views, the image is displayed vertically, in portrait orientation. In the Landscape- Primary and Landscape-Secondary views, the image is displayed horizontally, in landscape orientation.

■A portrait view is often optimal when you are using the tablet PC as a handheld.

■A landscape view is often optimal when you are displaying the image on an optional external monitor or projector.

2–14 Hardware Guide