HTC RHOD400 manual Connecting to Data Services from the Comm Manager, Data Connection Status Icons

Models: RHOD400

1 240
Download 240 pages 32.69 Kb
Page 160
Image 160

Connecting to Data Services from the Comm Manager

1.On the Home screen, slide to the Settings tab, and tap Wireless controls to open the Comm Manager.

2.Tap the switch next to DataConnection. The switch is in the ON position when your device is connected to data services.

Data Connection Status Icons

Your device displays the current status of your data connection through status icons at the top of the screen. The following symbols are used for data connections:

or

, , , or

A high-speed connection to the Sprint Mobile Broadband network (EVDO) or a Sprint 1xRTT data connection is available. These icons in conjunction with the data connection icons below let you know what type of connection your device is using.

An HSDPA, 3G, GPRS or EDGE network connection when you are roaming internationally.

Your device has an active connection to the Sprint Mobile Broadband (EVDO), Sprint 1xRTT data network, or a 3G/GPRS/EDGE international network. When active, data is being transferred and you cannot receive calls.

Your device’s data connection is idle. You can receive incoming calls.

If none of the above status icons are displayed, your device does not have a current data connection. To launch a connection, see “Connecting to Data Services” on page 149.

Disconnecting from Data Services

When you do not need to use data services, disconnect your data connection to save battery power and data cost.

1.On the Home screen, slide to the Settings tab, and tap Wireless controls to open the Comm Manager.

2.Tap the switch next to Data Connection. The switch is in the OFF position when your device has disconnected from data services.

150 Section 3B. Web and Data Services

Page 160
Image 160
HTC RHOD400 manual Connecting to Data Services from the Comm Manager, Data Connection Status Icons