Chapter 3. Planning 71
Figure 3-3 PCI-X slots in the x440
Other configuration information:
The x440 server supports connection to the RXE-100.
Refer to 3.2.3, “Remote Expansion Enclosure” on page 78 for more
information.
Video adapters are not supported.
The PCI slots supports 3.3 V adapters only.
The ServeRAID 4H adapter is not supported for internal drives bec ause the
adapter is too high to fit in the 4U server when a cable is attached to its
internal connector.
Do not install a ServeRAID card in slot 1. This is because there is little spac e
between the top of the adapter and the cover when the covers are closed.
This could damage the SCSI cable. See tip H176217 at
http://www.pc.ibm.com/qtechinfo/MIGR-43804.html for details.
The x440 comes with an additional pre-installed cable to enable the
ServeRAID adapter to connect to the internal drives.
Important: 5 V adapters are not supported.
PCI-X slot 1
(66 )MHz
PCI-X slot 2
(66 )MHz
PCI-X slot 3
(100 )MHz
PCI-X slot 4
(100 )MHz
PCI-X slot 5
(133 )MHz Back of server
Bus:D B AC
PCI-X slot 6
(133 MHz)