IBM CF Series manual Terminal Setup, II. Save the Setup

 



 


   *! #") !"! #   %"  )-,, "&  "    "( ! $ " " !"#  "  $! .(- "  #" " !! &     " $" "   (

"'  " "     #!#&  #  " " "  #      (

I. "Terminal" Setup

A. Open the "Terminal" program

B. Under "Settings"

1.“Terminal Emulation" - Select DEC VT-100 (ANSI)

2.“Terminal Preferences"

i. Select "Line Wrap" = NO (May be called "New Line")

ii.Select "Local Echo" = NO

iii.Select "CR->CR/LF " = NONE

iv.Select Columns = 80

v.Select "Terminal Font" = Courier 20

vi.Select "Translations" = NONE

vii.Select "Use Function, Arrow, and Ctrl Keys for Windows" = NO

3.“Communications"

i.Select "Baud Rate" = 9600

ii.Select "Data Bits" = 8

iii.Select "Stop Bits" = 1

iv.Select "Parity" = NONE

v.Select "Flow Control" = NONE

vi.Select "Connector" = Must match the port with the serial cable connected to the scanner's HOST connection.

C.The Diagnostic program only recognizes upper case letters, therefore the "CAPS LOCK" must be ON.

II.Save the Setup

A. Under "File"

1.Select "Save As..."

2.Save the settings as "terminal.trm" for automatic loading when the program starts.