Note: Be sure to set up the items in the order listed in the table.
5Place power adapter bracket (1) aside for later use. The other power adapter bracket is not used with this scanner and can be discarded.
Use the following table to locate the instructions you need to set up your printer and the paper handling options you purchased.
Topic | Go to page... |
Attaching the caster base to the | 5 |
|
|
Assembling the caster base for the 500 or | 8 |
drawer |
|
|
|
Installing the duplex unit | 11 |
|
|
Positioning the printer | 12 |
|
|
Attaching the caster base to the 2000-sheet drawer
1Remove and inventory all items from the
•
•Decals
•16 AWG power cord
•Jumper cord
2Place the decals, 16 AWG power cord, and jumper cord aside for later use.
3Remove the two screws inside the
Use a number 2 Phillips screwdriver to remove the screws and install the caster base.
If you have difficulty lifting the screws from the pockets, you can wait until the next step when you turn the drawer over, then the screws should fall out.
Assemble paper handling options
5
