IBM M22 MFP manual Installing screws, sheet, Drawer and caster, Base

The screws go through the drawer, caster cover, and into the caster frame assembly.

7 Tighten the screws securely.

8 If you have additional 500 or 250-sheet drawers, go to “Installing additional 500-sheet drawers” on page 10, “Installing 250-sheet drawers” on page 10 otherwise, go to “Installing the duplex unit” on page 11, or “Positioning the printer” on

page 12.

Installing screws	1	Remove a 500-sheet drawer from the carton.
in the 500-sheet	2	Remove all packing material and tape from the drawer and
drawer and caster		paper tray.
base	3	If you are using a table or printer stand, then place the 500-
		sheet drawer in that location and go to step 8, otherwise
		continue to step 4.
	4	Use a flat tip screwdriver to remove the rubber feet from the
Drawer bottom		bottom of the 500-sheet drawer.

5Place the drawer on the caster base.

6Insert two long stabilizer screws (1) into the pockets of the 500- sheet drawer.

Assemble paper handling options

9