6Wait for the MFP to initialize. When the scanner comes on, there is a short wait cycle while the firmware is initialized. Please Set Date/Time is displayed on the first line of the MFP control panel and “Please Wait...” is displayed on the second line.
Do not turn off the printer or unplug the scanner until the Please Wait... message disappears from the control panel.
First time setup | MFP panel: | When initialization is completed, the Please |
| Please Set Date/Time | Wait... message disappears. The Please |
| Set Date/Time prompt indicates that you | |
| Please Wait... | need to set required fax information. |
|
| |
|
|
|
Restart | MFP panel: | When you restart the MFP, a Please Wait... |
|
| message appears on the second line of the |
|
| control panel. When initialization is completed, |
| Please Wait... | the MFP control panel displays the current time |
| and date, plus the Ready message. | |
|
| |
|
|
|
Printer | Printer panel: | When you turn on your printer after installing the |
operator panel | 24MB of memory required | MFP, you may see the message on the left. The |
| Analog Fax option is disabled unless there is a | |
| for Fax... | minimum 24MB of printer memory. |
|
| If you receive this message, install additional |
|
| printer memory to meet or exceed the 24MB |
|
| requirement. |
|
|
|
Hardware setup is now complete. You are ready to configure the MFP.
Turn on the scanner and printer
29
